Tankvision Professional is a software which can manage data from the field. The parameters are forwarded via Tankvision Tank Scanner, Tankvision Multi Scan and even PLC or DCS systems via open standards such as Modbus and OPC DA Client. Tankvision is based on a distributed architecture on a local area network (LAN). Due to its modular structure it is ideally suited for tank farms as well as large refineries with hundreds of tanks.
Summarizes data from various Tank Scanners NXA820, Multi Scans NXA83 or host systems (such as PLC or PCS) via Modbus and performs tank calculations
Suited for tank farms as well as large refineries with hundreds of tanks
Approved for custody transfer applications according to NMi and PTB
Avantajlar
Single access point for up to 400 tanks on one system
Data acquisition Data management Process monitoring & visualization
Field of Application
Tankvision Professional NXA85 is a on-premise software for installation on a single station or server client system for monitoring of level and volumes as well as operation in small storage facilities up to refineries in the Oil & Gas industry.
Operating systems
Single Station or Client System: Windows 10 Windows 11 Server System: Windows Server 2022
Processor type
Single Station or Client System: Multi-core processor (e.g. Intel Core i7 or equivalent) Server System: Multi-core (4, 6, or 8) processor (e.g. Intel E5 Xeon)
Main memory
Single Station or Client System: 16 GB Server System: 16 GB (32+ GB if used as a virtual host)
Hard-disk capacity
Single Station or Client System: 500+ GB Server System: Dual 500+ GB minimum, RAID recommended
Seçiminize mümkün olan tüm seçeneklerle devam edin
Gizliliğinize değer veriyoruz
Tarayıcı deneyiminizi iyileştirmek, site işlevselliğini optimize etmek adına istatistikleri toplamak ve size uygun reklam ve içerikler göstermek için çerezleri kullanıyoruz.
"Tümünü kabul et" seçeneği ile çerez kullanımımıza rıza göstermiş olursunuz.
Daha fazla ayrıntı için lütfen göz atın: Çerez Politikamız .
